Submit your email below and we will contact you when the item is available.
Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle. Aligns well with cork or Homasote®* applications.
Install easily with Foam Tack™ Glue (ST1444). Pin in place with Foam Nails (ST1432).
1 roll/pkg- 3/16" D x 2 3/4" W x 24' L (5 mm x 6.98 cm x 7.31 m)
*Homasote® is a registered trademark of Homasote Company.
Learn about Track-Bed superior qualities, how it compares to homasote and cork as a sound-deadening material, and watch a demonstration of Track-Bed installation.
This video will inform you about Track-Bed and show you how to install Track-Bed on your layout base.
Woodland is committed to a business practice, which supports the economy of our local community.
We manufacture the vast majority of our products at our Linn Creek, Missouri manufacturing plant, which also houses our product development, package and creative design, marketing, sales and customer service operations.
Many of the products or parts of the products we manufacture overseas, come back home for packaging and shipping by Woodland employees.
When you purchase Woodland Quality Brands, you support American manufacturing working in balance with a global economy to support American jobs.
-Model making product. Not a toy! Not suitable for children under 14 years!
-Produit pour le modélisme. Pas un jouet! Pas adapté aux enfants de moins de 14 ans!
-Producto para modelismo. No es un juguete! No adecuado para niños menores de 14 años!
-Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
*
CAUTION: Cutting tools recommended. Use with care.
When modeling in O scale, Inclines and Risers need to be placed side-by-side to double their width.
The Track-Bed is a dark gray.
For a strong bond, rough-up the bottom of Track-Bed™ with 80-grit sandpaper and attach using the contact method, working in small, manageable sections.
Contact Method - Apply Foam Tack Glue™ to both surfaces, allow to set for approximately 20 minutes, but no longer than 1 hour, until tacky, then apply.
Click here to view a video on installing Track-Bed.
Lay out Track-Bed™ in one piece. Accommodate tight curves by separating the Track-Bed into two narrow strips along the slit that runs lengthwise. Lay the two pieces seperately, butting them snuggly in the middle. Do this by first drawing a center line for your track. Lay each half strip of Track-Bed on either side along this center line.
Click here to view a video on installing Track-Bed.
N scale Track-Bed - 1/3 oz of Foam Tack Glue covers approximately 4 feet of N scale Track-Bed
HO scale Track Bed - 1/3 oz of Foam Tack Glue covers approximately 2 feet of HO scale Track-Bed
O scale Track Bed - 1/3 oz of Foam Tack Glue covers approximately 1 foot of O scale Track-Bed
Super Sheets - 1 oz per Super Sheet. 1 bottle (12 fl oz) will do 12 Super Sheets.
NOTE: Coverage is approximate. Exact coverage depends on thickness of application.
No, do not cut the Track-Bed with a Hot Wire Foam Cutter. This may emit toxic fumes.
Yes, Track-Bed is solvent resistant.
Yes. Soften Foam Tack Glue with warm, soapy water. If the glue is difficult to remove, use denatured alcohol.
Track-Bed® absorbs the noise and vibration of train operations, so you can enjoy the true "clickety-clack" sound. Track-Bed costs less, does not require pre-soaking, and is easy to apply. It will not dry out, crack and crumble like cork. Since Track-Bed is compatible and aligns easily with cork, you can update your cork bed at any time.
To remove Track-Bed™, soften the Foam Tack Glue™ with warm, soapy water. If the glue is hard to remove, use denature alcohol.
You should have no problem adhering Ballast to your Track-Bed™ with this tested method.
1. Pour Ballast over track. Brush from rails and tops of ties.
2. Mist with Scenic Cement™ to wet the surface, and then saturate Ballast using an eyedropper or Scenic Sprayer™.
3. Clean rails before use.
Click here to view a demonstration of applying Ballast to track.
Yes, our Track-Bed™ works great on any type layout with any kind of track of a standard width. For larger scales, consider using Track-Bed Sheets.
We do not manufacture plastic screws and have never tested their usage. This is how we recommend you attach track to your Track-Bed.
We recommend using Foam Tack Glue. Sand surface of Track-Bed with 120-grit sandpaper, then spread a thin layer of glue over the Track-Bed surface and install track. Pin in place with Foam Nails while drying.
Click here to view a video on installing Track-Bed.
Click here to view a portion of a video demonstrating how to install Track-Bed along a curve.