Specially formulated for foam but also effective on wood, cork and Homasote®* board. Foam Tack Glue dries clear and is high-tack, non-toxic and water soluble. Use as a contact cement whenever bonding two large surfaces.
12 fl oz (354mL)
*Homasote® is a registered trademark of Homasote Company.
See how Inclines take your track from one level to another in both straight and curved areas, without you having to make the complicated calculations usually required to create grades and curves.
Watch how easy it is to make a tunnel using the SubTerrain Lightweight Layout System.
Specially formulated for foam and also effective on wood, cork and Homasote board. Foam Tack Glue is high-tack, non-toxic and water soluble. It dries clear and flexible. Use as a contact cement whenever bonding two large surfaces.
See a brief demonstration of the products available in the SubTerrain Lightweight Layout System and the advantages of using the foam System instead of plywood for a layout base.
This video will inform you about Track-Bed and show you how to install Track-Bed on your layout base.
Woodland is committed to a business practice, which supports the economy of our local community.
We manufacture the vast majority of our products at our Linn Creek, Missouri manufacturing plant, which also houses our product development, package and creative design, marketing, sales and customer service operations.
Many of the products or parts of the products we manufacture overseas, come back home for packaging and shipping by Woodland employees.
When you purchase Woodland Quality Brands, you support American manufacturing working in balance with a global economy to support American jobs.
-Model making product. Not a toy! Not suitable for children under 14 years!
-Produit pour le modélisme. Pas un jouet! Pas adapté aux enfants de moins de 14 ans!
-Producto para modelismo. No es un juguete! No adecuado para niños menores de 14 años!
-Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
CAUTION: Store above 32° F (0° C).
MISE EN GARDE: Produit à conserver à une température supérieure à 0° C.
PRECAUCIÓN: Conserve a una temperatura superior a 0° C.
ACHTUNG: Über 0 °C aufbewahren.
Woodland Quality Brands is committed to manufacturing superior quality, safety-tested products. All of our modeling materials are evaluated by a Consumer Product Safety Commission (CPSC) Approved Toxicologist to ensure they meet the standards for art materials set out by ASTM (American Society for Testing and Materials) International, if applicable. "ASTM International, formerly known as the American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards. Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence." For more information about ASTM International, visit http://www.astm.org/ABOUT/overview.html.
For a strong bond, rough-up the bottom of Track-Bed™ with 80-grit sandpaper and attach using the contact method, working in small, manageable sections.
Contact Method - Apply Foam Tack Glue™ to both surfaces, allow to set for approximately 20 minutes, but no longer than 1 hour, until tacky, then apply.
Click here to view a video on installing Track-Bed.
Yes. Soften Foam Tack Glue with warm, soapy water. If the glue is difficult to remove, use denatured alcohol.
To remove Track-Bed™, soften the Foam Tack Glue™ with warm, soapy water. If the glue is hard to remove, use denature alcohol.
N scale Track-Bed - 1/3 oz of Foam Tack Glue covers approximately 4 feet of N scale Track-Bed
HO scale Track Bed - 1/3 oz of Foam Tack Glue covers approximately 2 feet of HO scale Track-Bed
O scale Track Bed - 1/3 oz of Foam Tack Glue covers approximately 1 foot of O scale Track-Bed
Super Sheets - 1 oz per Super Sheet. 1 bottle (12 fl oz) will do 12 Super Sheets.
NOTE: Coverage is approximate. Exact coverage depends on thickness of application.
Yes, but we recommend attaching the cork roadbed using the contact gluing method. Apply Foam Tack Glue to the back of the cork roadbed and surface where it will be attached. Let the adhesive dry until clear (maximum working time, 1 hour). Press cork roadbed in place, glue will bond instantly.
Both adhesives work equally well. Foam Tack Glue is high tack white glue and works well as a contact cement. Low Temp Foam Glue bonds instantly and works well for a quicker installation.
Click here to learn about adhering SubTerrain.
We recommend Foam Tack Glue for attaching track.
Click here to view a demonstration of attaching track.
Foam Tack Glue can be used to attach plywood, Risers and Inclines/Declines, and Track-Bed to pink extruded foam, but it must first be sanded with #120-grit sandpaper. This type of foam has a slick surface that needs to be roughed up so the glue has something to hold on to.
Use the contact gluing method to adhere materials to the extruded foam. Spread an even layer of Foam Tack Glue on both contact surfaces. Let the glue dry until clear (maximum working time is one hour) and then press surfaces together. The glue will bond instantly, creating a secure adhesion.