We recommend using Foam Tack Glue to attach Track-Bed and Track to a layout.
There are different application methods for attaching Track-Bed to your layout depending on the base material.
Plaster surfaces: Spread a thin, even layer of Foam Tack Glue where Track-Bed will be installed. Lay Track-Bed and pin in place with Foam Nails to secure while drying. Work in two to three-foot sections. This application method also allows the modeler to make adjustments while installing Track-Bed.
A permanent application method for plaster and other surfaces: Use the Contact Gluing Method. Apply Foam Tack Glue to both contact surfaces. Let dry until clear and tacky (maximum working time is 1 hour), and then press Track-Bed in place. Installation of Track-Bed has to be precise, because glue will bond instantly. Place Track-Bed in manageable sections.
For both application methods, we recommend sanding the top and bottom surface of Track-Bed with 120-grit sandpaper before installation.
To attach your track to the Track-Bed, spread a thin, even layer of Foam Tack Glue on top of the Track-Bed. Place pieces of track on glue and pin in place with Foam Nails to secure while drying.