Incline Starters are wedges of high-density foam used to start your track on an incline or decline. Each piece in a package elevates/lowers the track to/from a designated number of inches within a 24" stretch, allowing for a smooth transition from one height to another.
To install, pin in place with Foam Nails and attach with Foam Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks. Use alone or with Risers.
8/pkg - each piece elevates from 0 - 1/2" (0 - 1.27 cm) within 24" (60.96 cm) and measures 2 1/2" w x 24" l (6.35 cm x 60.9 cm)- $8.99
4/pkg - each piece elevates from 0 - 1" (0 - 2.54 cm) within 24" (60.96 cm) and measures 2 1/2" w x 24" l (6.35 cm x 60.9 cm)- $8.99
6/pkg - each piece elevates from 0 - 3/4" (0 - 1.9 cm) within 24" (60.96 cm) and measures 2 1/2" w x 24" l (6.35 cm x 60.9 cm)- $8.99
See how Inclines take your track from one level to another in both straight and curved areas, without you having to make the complicated calculations usually required to create grades and curves.
See a brief demonstration of the products available in the SubTerrain Lightweight Layout System and the advantages of using the foam System instead of plywood for a layout base.
Learn how to build a model railroad layout in five easy steps with the revolutionary SubTerrain Lightweight Layout System.
Learn to bevel, widen, narrow and bank Risers and Inclines to fir the tracking and road requirements of your layout.
Short demonstration on using Risers and Incline Sets to connect multiple levels on layouts.
-Model making product. Not a toy! Not suitable for children under 14 years!
-Produit pour le modélisme. Pas un jouet! Pas adapté aux enfants de moins de 14 ans!
-Producto para modelismo. No es un juguete! No adecuado para niños menores de 14 años!
-Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
CAUTION: Cutting tools recommended. Use with care.
When modeling in O scale, Inclines and Risers need to be placed side-by-side to double their width.
Risers and Inclines are 2 1/2" wide. You will need to install 2 sets side-by-side for any scale double track.
No, you do not need to use Risers under Inclines, but using both allows you to increase the elevation of the track throughout the layout to create lower surrounding areas easily, such as creek beds and ravines. For further information and instruction about using Risers and Inclines, watch the how-to videos on our website and consider purchasing the SubTerrain® Manual.
Both adhesives work equally well. Foam Tack Glue is high tack white glue and works well as a contact cement. Low Temp Foam Glue bonds instantly and works well for a quicker installation.
Click here to learn about adhering SubTerrain.