Ground Cover

A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.

Landscape Accents

Add flowers, fruit, stumps and dead fall details to your project.
Frequently Asked Questions
- What is the best way to apply Fruit and Flowers products?
  
  The best way to adhere Fruit is to spray Scenic Cement™ onto foliage, then let it set until tacky (nearly dry). Sprinkle on Fruit and overspray with a VERY fine mist of Scenic Cement. Do not get the fruit too wet or the color may run.
  
  To adhere Flowers, spray Scenic Cement on landscape, sprinkle Flowers on wet adhesive and spray again to seal in place.
- Do you have any tips for modeling flowers?
  
  We have a variety of products that can be used to model flowers. As an idea, use Flowering Foliage, which is available in Yellow and Purple to model flowering fields, bushes, trees, etc. Or, sprinkle Flowers (includes Red, Yellow, White and Orange) or Pollen (Yellow, Orange, Red, Purple, Pink) on Foliage, Poly Fiber, Field Grass or any of our turf products.
- What is the average size in N scale for the Broken and Cut Stumps?
  
  Cut Stumps and Broken Stumps in N scale (1:160 inches) are approximately 3 scale feet wide (7/32" / 5.5 mm base width) and 2-1/2 scale feet tall (3/16" / 4.7 mm).
Fine Turf

Adds texture and highlights to trees, grasses, foliage and other ground covers and for modeling fresh, scorched and dying grasses, moss, weeds and dirt roads.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model the different colors of yellow in fall foliage?
  
  We have a variety of yellow foliage and turf for making trees and adding highlights to create unique colors.
  
  Foliage for Making Trees
  -Early Fall Foliage includes yellow and a yellow mix.
  -Yellow Flowering Foliage is yellow turf on a green fiber backing to model the transition from summer to fall.
  -Fall Mix Clump-Foliage includes yellow and three other fall colors that can be mixed with the yellow to create unique shades.
  
  Highlighting Turf
  -Yellow Grass Coarse Turf
  
  -Fall Yellow Coarse Turf
  -Yellow Grass Fine Turf
  
  Use the products individually and in combination to create a wide variety of unique yellow trees.
Blended Turf

Use as a base covering over terrain pigment to model grass, weeds and other low growing plants.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
Coarse Turf

Model low lying vegetation, add texture and highlights and use to transition between low, medium and high ground covers.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model the different colors of yellow in fall foliage?
  
  We have a variety of yellow foliage and turf for making trees and adding highlights to create unique colors.
  
  Foliage for Making Trees
  -Early Fall Foliage includes yellow and a yellow mix.
  -Yellow Flowering Foliage is yellow turf on a green fiber backing to model the transition from summer to fall.
  -Fall Mix Clump-Foliage includes yellow and three other fall colors that can be mixed with the yellow to create unique shades.
  
  Highlighting Turf
  -Yellow Grass Coarse Turf
  
  -Fall Yellow Coarse Turf
  -Yellow Grass Fine Turf
  
  Use the products individually and in combination to create a wide variety of unique yellow trees.
Field Grass

An extremely fine, natural hair product that models tall grass, field grass and weeds.
Static Grass Flock^™

Use to model grasses, weeds and forest litter.
Underbrush

Model low-to-medium ground cover, such as bushes, trees and shrubs, and use to make small to medium trees.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
Bushes

Models medium to high ground cover, such as bushes, hedges shrubs and trees, and is the perfect product to make medium to large trees.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
Clump-Foliage^™

Mix and match with other foliage to model medium to high ground covers, create variation in trees, shrubs, hedges and bushes and to landscape hillsides.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- What is the best way to adhere clump foliage to nearly vertical surfaces? I have tried many methods but the clumps keep falling off after a few weeks.
  
  This depends on what type of surface you want to adhere the foliage to. We have created three-dimensional trees by gluing foliage to foam board backgrounds. The Clump-Foliage™ must be broken into manageable size pieces (approximately the size of our Bushes). We use Foam Tack Glue™ to adhere the foliage, piece by piece. Dry flat and let the glue dry thoroughly.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model the different colors of yellow in fall foliage?
  
  We have a variety of yellow foliage and turf for making trees and adding highlights to create unique colors.
  
  Foliage for Making Trees
  -Early Fall Foliage includes yellow and a yellow mix.
  -Yellow Flowering Foliage is yellow turf on a green fiber backing to model the transition from summer to fall.
  -Fall Mix Clump-Foliage includes yellow and three other fall colors that can be mixed with the yellow to create unique shades.
  
  Highlighting Turf
  -Yellow Grass Coarse Turf
  
  -Fall Yellow Coarse Turf
  -Yellow Grass Fine Turf
  
  Use the products individually and in combination to create a wide variety of unique yellow trees.
- I am having a problem with my foliage staying on trees. I used Clump-Foliage broken up into small pieces, put on Hob-E-Tac and waited for about 10 minutes. What could it be?
  
  The drying time of Hob-e-Tac® varies due to environmental conditions and thickness of application. Typically, dry time is between 20-45 minutes. It is possible the 10 minutes of dry time was not sufficient. Hob-e-Tac must dry clear before foliage is applied or it will not stick. If it is still white, it is not dry.
  
  Recommendation for making trees. Apply Hob-e-Tac to all branches. Avoid trunk area where foliage does not grow naturally. Wait for adhesive to become clear and tacky. Break Clump-Foliage into manageable size pieces and pinch firmly onto branches.
- How do you get the clump foliage trees so full? I bought your kit and I cannot get them to look like that. Do you apply another coat of the hob-e-tac to the first application of foliage then add more foliage?
  
  Here is our method for modeling trees with Clump-Foliage, which provides a very thick, realistic looking tree.
  1. Bend and twist Tree Armatures into realistic, three-dimensional shapes. A popular technique is to have the branches resemble deer antlers. This shape helps hold more foliage on Armatures.
  2. Apply Hob-e-Tac (S195) liberally to all sides of branches, avoiding trunk area where foliage does not grow naturally. Wait for adhesive to become clear and tacky (very important). Dry time varies due to environmental conditions, 20-45+ minutes.
  3. Break Clump-Foliage into manageable size pieces that are proprotional to the size of the Tree Armatures you are using. Dip the Tree Armature deep into the bag of Clump-Foliage, remove carefully and shake gently to remove excess. Dip into bag of foliage again, if desired. Then, pinch Clump-Foliage firmly on branches to secure.
  4. Overspray Clump-Foliage with Scenic Cement (S192) to help seal in place.
Foliage Clusters^™

Break into any size to model bushes, hedges, shrubs and trees or high ground cover.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- How many 2-4” Tree Armatures can be foliated with one bag of Foliage Clusters?
  
  This is difficult to calculate with Foliage Clusters, as the size of foliage is created by the customer. We recommend breaking foliage into pieces approximately 1/8"-5/16" for 2"-4" Tree Armatures. With these size pieces, one bag of Foliage Clusters will foliage approximately 40 trees. Actual coverage depends on how thick the foliage is applied.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model the different colors of yellow in fall foliage?
  
  We have a variety of yellow foliage and turf for making trees and adding highlights to create unique colors.
  
  Foliage for Making Trees
  -Early Fall Foliage includes yellow and a yellow mix.
  -Yellow Flowering Foliage is yellow turf on a green fiber backing to model the transition from summer to fall.
  -Fall Mix Clump-Foliage includes yellow and three other fall colors that can be mixed with the yellow to create unique shades.
  
  Highlighting Turf
  -Yellow Grass Coarse Turf
  
  -Fall Yellow Coarse Turf
  -Yellow Grass Fine Turf
  
  Use the products individually and in combination to create a wide variety of unique yellow trees.
Fine-Leaf Foliage^™

Use the fine leaf detail to model bushes, saplings, shrubs, hedges and trees.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model a tumbleweed?
  
  There are a variety of products you can use to model tumbleweeds.
  
  Fine-Leaf Foliage - Dead Foliage or Light Green and Forest Canopy-Light Green will model very realistic tumbleweeds.
  
  Poly Fiber can also be used. Tear off a small piece of Poly Fiber and stretch until very thin and lacy. Roll a piece of stretched fiber between your palms to give it shape.
Lichen

Use Lichen to model bushes, moss and other ground cover, or as tree foliage to model quick and economical tree masses.
Foliage

Use to make tree foliage, vines, weeds, bushes, hedges and other low growing lacy foliage.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- Can foliage, turf and tree products be used outdoors?
  
  Woodland Scenics products are not designed to be exposed to the outdoor elements.
- How can I model the different colors of yellow in fall foliage?
  
  We have a variety of yellow foliage and turf for making trees and adding highlights to create unique colors.
  
  Foliage for Making Trees
  -Early Fall Foliage includes yellow and a yellow mix.
  -Yellow Flowering Foliage is yellow turf on a green fiber backing to model the transition from summer to fall.
  -Fall Mix Clump-Foliage includes yellow and three other fall colors that can be mixed with the yellow to create unique shades.
  
  Highlighting Turf
  -Yellow Grass Coarse Turf
  
  -Fall Yellow Coarse Turf
  -Yellow Grass Fine Turf
  
  Use the products individually and in combination to create a wide variety of unique yellow trees.
- How can I model a tumbleweed?
  
  There are a variety of products you can use to model tumbleweeds.
  
  Fine-Leaf Foliage - Dead Foliage or Light Green and Forest Canopy-Light Green will model very realistic tumbleweeds.
  
  Poly Fiber can also be used. Tear off a small piece of Poly Fiber and stretch until very thin and lacy. Roll a piece of stretched fiber between your palms to give it shape.
Poly Fiber

Use to create vines, undergrowth and other rambling vegetation.
Frequently Asked Questions
- I recently purchased your turf and foliage materials. They were not exactly the same color as the same product I've used in the past. Why?
  
  Our landscaping system is based on nature's principle of contrasts and highlights. Although many of our colors are close, slight variations occur from batch to batch. These variations help create more realistic scenery and blend easily with other existing colors.
- How can I model a tumbleweed?
  
  There are a variety of products you can use to model tumbleweeds.
  
  Fine-Leaf Foliage - Dead Foliage or Light Green and Forest Canopy-Light Green will model very realistic tumbleweeds.
  
  Poly Fiber can also be used. Tear off a small piece of Poly Fiber and stretch until very thin and lacy. Roll a piece of stretched fiber between your palms to give it shape.
Soft Flake Snow^™

Use to model light snow, heavy drifts or to create frothy, river rapids.
Frequently Asked Questions
- How do I give a matte-white snow base a crystalized, icy look?
  
  Mix a tiny amount of fine, iridescent glitter with Snow Flake Snow™ until the desired look is achieved, keeping in mind that a little goes a long way. Spray an already modeled snow base with Scenic Cement™ and apply the mixture while glue is wet.
  
  You can also mix glitter with Water Effects™ before modeling icicles.
- How can I make a frozen pond?
  
  Prepare your water areas as usual and pour Realistic Water. While it is still wet, lightly sprinkle Soft Flake Snow on top. This will create a glazed, frosted look to simulate a frozen, icy surface.
- How do I make realistic snow drifts?
  
  There are two techniques you can use.
  
  1. Mix equal parts of white acrylic paint with Soft Flake Snow™
  
  2. Spread Flex Paste™ with a craft stick, then sprinkle with Soft Flake snow while wet.
- How much area will Soft Flake Snow cover?
  
  1 lb covers 5.8 ft² (0.538 meters²) and is 0.065 in (1.65 mm) thick.
Talus

Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts.
Frequently Asked Questions
- Generally, what is the difference between Ballast and Talus?
  
  Ballast is placed along the railroad track to model actual ballast that holds track in place.
  
  Talus is used to model rock debris under rock outcroppings, rocky hillsides or embankments.
- I would like to duplicate the look of the Desert Sand Ready-Grass Sheet. Is this color turf available?
  
  Desert Sand ReadyGrass Vinyl Mats are made with a special, very fine blend of Talus.
  
  The closest match is Fine Grade Talus in Buff.
  
  To achieve the same fine consistency, place Talus in a plastic bag and seal. On a safe surface, tap Talus with a hammer until desired consistency is achieved.
- What is the best way to model sand?
  
  Place fine grade Talus in a plastic bag and seal it. On a safe surface, tap Talus with a hammer until desired consistency is achieved. It can also be colored with Earth Colors Liquid Pigment to achieve the desired color of sand.
Ballast and Coal

Use Ballast and Coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads and coal piles.
Frequently Asked Questions
- Does your coal have any metallic or magnetic substances in it?
  
  No, our coal does not contain metal or magnetic substances of any kind.
- Generally, what is the difference between Ballast and Talus?
  
  Ballast is placed along the railroad track to model actual ballast that holds track in place.
  
  Talus is used to model rock debris under rock outcroppings, rocky hillsides or embankments.
- I am going to place Ballast on my ReadyGrass Mat. Do I scrape the turf off the mat first, or just add the Ballast on top of the turf?
  
  If you are just adding landscape materials, such as Ballast, there is no need to scrape the turf off prior to application.
  
  If you are laying track and adding Ballast, we recommend scraping the turf off before adhering the track.
- Is your "ballast" real stone?
  
  No, our Ballast is not real stone.
- I wish to change the color and shade of some packets of ballast as I can not match any of your products to the color that I require. Could you please recommend the types of inks, dyes, paints or anything I could use to effect the changes that I need.
  
  We recommend using our Earth Colors Liquid Pigments (C1216-C1223, C1228, C1229) to dye Ballast.
  
  In a disposable plastic cup, add Ballast to desired color of pigment and mix thoroughly with a craft stick or paintbrush. If a lighter color is desired, dilute pigment with water. Let set until preferred color is achieved. Spread out Ballast on newspaper or paper towels and let dry.
- I am building the Grand Valley Layout Kit and the instructions say to use "wet water" with Ballast. On YouTube I found a Woodland video on how to adhere Ballast and it said not to use "wet water" or it will interfere with the adhesion. Which is correct?
  
  Both are correct. The Scenic Cement that is included with the Grand Valley Layout Kit is a concentrated formula and does not contain the wetting agent that regular Scenic Cement does. This is why the Grand Valley (and other Layout Kits) instructions state to mist Ballast with "wet water" before applying the Scenic Cement.
- I have started my layout. Should I ballast my track first?
  
  If there are tunnels on the layout, ballast track approximately 6” into the tunnels on both ends before enclosing them.
  
  Ballast the rest of the track after coloring rock castings with Earth Colors Liquid Pigment and applying Earth Colors Liquid Pigment-Earth Undercoat to the terrain.
  
  Add landscape materials to the layout after ballasting is completed.
- I want to Ballast my track. Can I put Scenic Glue over my Track-Bed to adhere it?
  
  We recommend using Scenic Cement™ rather than Scenic Glue™ because the Ballast will lay more evenly and be better secured.
  
  Apply Ballast onto track and brush from rails and top of ties. Mist adhesive over Ballast to wet the surface, and then saturate it for a strong bond using an eyedropper or the Scenic Sprayer™. Clean rails before use.
- I used Scenic Cement to apply my Ballast, and now I need to disassemble my layout and move it. How do I release the Ballast from the track?
  
  To remove Ballast from the track, soften the Scenic Cement™ with warm, soapy water. If the glue is hard to remove, use denatured alcohol.

Login

Ground Cover

Landscape Accents

Frequently Asked Questions

Fine Turf

Frequently Asked Questions

Blended Turf

Frequently Asked Questions

Coarse Turf

Frequently Asked Questions

Field Grass

Static Grass Flock™

Underbrush

Frequently Asked Questions

Bushes

Frequently Asked Questions

Clump-Foliage™

Frequently Asked Questions

Foliage Clusters™

Frequently Asked Questions

Fine-Leaf Foliage™

Frequently Asked Questions

Lichen

Foliage

Frequently Asked Questions

Poly Fiber

Frequently Asked Questions

Soft Flake Snow™

Frequently Asked Questions

Talus

Frequently Asked Questions

Ballast and Coal

Frequently Asked Questions

Static Grass Flock^™

Clump-Foliage^™

Foliage Clusters^™

Fine-Leaf Foliage^™

Soft Flake Snow^™