Desert Sand Mats

Description

Unique characteristics make this non-shedding, vinyl grass mat the best on the market! ReadyGrass mats are non-fading, colorfast, made from durable/tear resistant material, and easily cut to any size. Simply scrape turf from Mat surface to create space for roads and water areas. Add trees and landscape to complete the scene. Permanently mount the ReadyGrass Vinyl Mat to your layout or roll it up to store for future use!

• RG5125 - Desert Sand Large Roll - 50" x 100" (127 cm x 254 cm) - $39.99
-------------------
• RG5135 - Desert Sand Medium Roll - 33" x 50" (83.8 cm x 127 cm) - $18.99
-------------------
• RG5145 - Desert Sand Project Sheet - 12 1/2" x 14 1/8" (31.7 cm x 35.8 cm) - $5.99
-------------------
• RG5175 - Desert Sand Small Roll - 25" x 33" (63.5 cm x 83.8 cm) - $12.99
-------------------

• I have a portable layout that I will be taking to and from hobby shows. I have used the ReadyGrass mat. What can I use to waterproof it in case it gets rained on from time to time?

  The ReadyGrass Mat was not designed to get wet. However, if the mat is prepped properly, it should be okay after a short sprint in a light rain. Spray the ReadyGrass Mat with a few light layers of Scenic Cement (S191), but do not saturate. Let each layer dry completely before applying the next. NOTE: This will make the ReadyGrass Mat a bit darker.

• What is the thickness of the ReadyGrass Vinyl Mat?

  The thickness of the vinyl mat alone is 7.5 mil.

  The vinyl mat and the turf together are approximately 1/32" (0.03") or 0.8 mm thick.

• Will hills made with the ReadyGrass Mat be strong enough to support lead miniature wargaming figures? Lots of them, and for long periods of time?

  For this application, we suggest using Shaper Sheet and Shaper Sheet Plaster. Shaper Sheet is a revolutionary material that can be shaped and reshaped to form terrain with any level of detail. When covered in Shaper Sheet Plaster, it becomes a very durable surface that will support heavy game play.
  
  Cover Shaper Sheet Plaster in landscape materials to model a realistic gaming terrain.

• How do I attach a ReadyGrass Vinyl Mat to a base such as foam, plywood or other porous surface?

  Use Woodland Scenics Mat Adhesive to attach ReadyGrass Vinyl Mats to flat surfaces. The 7 fluid ounce bottle covers approx. 5000 square inches. 

   

  If attaching ReadyGrass to a porous surface, sand surface with 100-grit sandpaper, then prime with a flat finish acrylic paint to seal prior to applying Adhesive. If a semi-gloss or gloss acrylic paint is used, it must be lightly sanded with fine-grade sandpaper before attaching the ReadyGrass Vinyl Mat. Let paint dry completely.

  
  For a repositioning bond, apply Adhesive to surface only. This will allow the Grass Mat to be peeled up and reapplied to another surface. It is not a permanent bond.

   

  If wanting a permanent bond, apply Adhesive to surface and back of ReadyGrass Vinyl Mat.

   

  How to Apply - Brush or roll a generous, even layer of Mat Adhesive. Let dry until clear and tacky (max. working time, 2 hours). Do not force dry with heat. Align mat and smooth from center to edges with a rolling device. A rolling pin works well.